Phoenix Sabers primarily provides assembly and electronics wiring of parts from The Custom Saber Shop.
Our primary method of assembly is to install electronics in a design created in the TCSS MHS Builder. (Listed under Other Notable Sites)
We also provide installation of electronics in other sabers such as SaberForge as well as SOME Master Replicas and Hasbro Conversions (pending availability of conversion kits).
Once the design is created, send a picture of it in an email to phxsabers@gmail.com with the color of the blade you wish to make.
Eligible colors are: Royal Blue, Sky Blue, Cyan, Green, Red, Amber, White, Purple, Orange, Yellow, Hot Pink, and RGB. (RGB may require design changes).
All sabers will be rechargeable and include a 3.7V Lithium Ion Battery.
Stunt sabers can include an arduino based stunt effects board for flicker/flash on clash/RGB as an option.
As well specify the type of blade and blade length (between 24″ and 36″) you would like to use.
Available Blade Types: (Mid Grade, Heavy Grade, Trans-White Mid, Trans-White Heavy, Neopixel [Other types may be available, contact to inquire]).
As well, state if you are interested in sound or not.
Possible Sound Systems: Plecter Labs Nano Biscotte, Plecter Labs Crystal Focus, Verso, Proffie (May be Customer Supplied, subject to availability.)
You may also request illuminated switches, covertec clips (subject to availability) and in hilt recharge ports. (may be recommended or required anyway)
Upon reciept of the e-mail, you should recieve a response within 72 hours with recommended designs and quotes on prices.
We also may provide repair services for certain sabers. If your saber is in need of repair, please send an e-mail to the above address with the following: Saber Brand, Saber Model (if Applicable) and Issues you’re having with the saber.
Here is a list of services we do offer and prices for them. Attention, we do not manufacture shrouds. (We CAN attach a pre-designed one though)
Assembly of Stunt Saber: Parts Price + $175 Labor
Assembly of Saber with Soundboard, In Hilt LED: Parts Price + $250 Labor
Assembly of Saber with Soundboard, Neopixel Blade:: Parts Price + $325 Labor
The labor prices are subject to change depending on difficulty of job. These are just generally the maximums.
We also sell assembled saber blades. Prices listed here (these are pre-shipping): Click Here for Blade Prices
I also do repairs and upgrades but prices will vary for these. In general there will be less parts required and/or less labor required for a repair so the prices will likely be less than a full installation, with the maximum price being that of the Assembly of that type of saber. On a repair, you are responsible for shipping both ways. on an upgrade, you are responsible for shipping to me.
In all cases with sound boards supplied by Phoenix Sabers, it is subject to Availability. Price may change due to availability.
In some cases we can install crystal chambers or reverse sound in your saber. Charges for these will be quoted on a per case basis.
Diagnosis for Repair of any Non-Warrantied Saber: Shipping to and from Phoenix Sabers. You will receive a quote for full repair, or I can just send it back to you unmodified. If it is under warranty by another builder, it is better for you to send it back to the builder, as my repair would void that warranty.
I do repair sabers not made by Phoenix Sabers, however this may void your warranty if you have one with the original manufacturer.
NOTE: Repair services are dependent on the manufacturer of the saber. Adding certain features to certain brands (Ultra Sabers especially) requires more parts. If I am hired to repair a saber, I will quote it for repair of damage and replacement of parts that are potentially dangerous. (Hot glued heatsinks, unprotected lithium batteries).
You get a limited warranty with your purchase/repair, as described below
Limited Warranty covers Phoenix Sabers product for 30 days from the original date of receipt from Phoenix Sabers.
This warranty does not cover damage from the following: acts of god, accidents, misuse, abuse, negligence, improper handling, commercial use or modifications of the product. It also does not cover standard wear and tear, improper use or maintenance of the product, or any attempted repair by anyone other than Phoenix Sabers.
The customer is responsible for all shipping charges.
Soundboards, LEDs and Batteries are not warrantied by Phoenix Sabers as they are not Phoenix Sabers products. Soundboards must be repaired by the appropriate soundboard manufacturer or those who are capable of repairing soundboards.
I will repair items not covered by the warranty, but it will be at the customers expense.
Warranty is non-transferrable.